ejoin DUPLO

Dual Connector AC Charging Station

Duplo is made primarily as a commercial charging solution. This means it has an RFID card reader, online connectivity and OCPP protocol which allows connection to the backend system and charging. The station can charge two EVs at the same time and each connector has its own meter.

gradient_bolt_icon

Maximum charging power

2x11 kW / 2x22 kW

2x11 kW / 2x22 kW

gradient_plug_icon

Input/output voltage

IEC: One phase: 184-276 V, 50/60 Hz; IEC: Three phase: 320-480 V, 50/60 Hz

IEC: One phase: 184-276 V, 50/60 Hz; IEC: Three phase: 320-480 V, 50/60 Hz

gradient_tempmeter_icon

Operating temperature

-25 °C to +60 °C

-25 °C to +60 °C

gradient_shield_icon

Level of protection

IP54, IK10

IP54, IK10

gradient_dc_icon

Output options

Plug Type 2 cable/pin, GB/T cable/pin, Plug Type 1 cable/pin

Plug Type 2 cable/pin, GB/T cable/pin, Plug Type 1 cable/pin

Product description

Downloads

ejoin DUPLO description

Duplo is made primarily as a commercial charging solution. This means it has an RFID card reader, online connectivity and OCPP protocol which allows connection to the backend system and charging.

The station is equipped with a display and keypad. The display shows all relevant charging information. The keypad can be used to access the station settings.

The Duplo is manufactured with Plug Type 2 connectors. Output can be in the form of straight cables, spiral cables or sockets. The connectors can be modified for other markets and changed to Plug Type 1 or GB/T, which can be used in other countries. Duplo is equipped with two connectors and these can be used simultaneously. Depending on your configuration, the Duplo can charge both vehicles at the same time with up to 22kW of power.

In the Duplo station, you can customize a number of features to suit your own requirements. You can choose from several output types, online connections, power controls or additional functions.

For download

PDF
PDF
Technical parameters (0,4MB)
Technical parameters (0,4MB)