ejoin RAPID

DC charging station

Fast charging station with the possibility of charging two electric cars at the same time. Charging is possible with two CCS2 connectors. The charging station can be further extended with one Type 2 AC connector, which ensures slow charging of a third electric vehicle with an output of up to 22 kW. The charging station is available in outputs from 60 kW to 400 kW. In the case of charging two EVs via CCS2 connectors, the charging power is split.

gradient_bolt_icon

Maximum charging power

60 kW - 400 kW

60 kW - 400 kW

gradient_plug_icon

Input voltage range

400 VAC +/- 10%, 50 Hz

400 VAC +/- 10%, 50 Hz

gradient_tempmeter_icon

Operating temperature

-35 °C to +55 °C

-35 °C to +55 °C

gradient_shield_icon

Level of protection

IP54, IK10

IP54, IK10

gradient_dc_icon

Output options

CCS2 cables, CCS1 cables, GB/T cables, CHAdeMO cables, AC socket

CCS2 cables, CCS1 cables, GB/T cables, CHAdeMO cables, AC socket

Number of electric vehicles serviced

2, simultaneous

2, simultaneous

Product description

Downloads

ejoin RAPID description

DC charging stations provide direct charging of the electric vehicle battery, making charging possible at high power and in a short time. Ejoin Rapid offers charging power from 60 kW to 400 kW, depending on the configuration.

The Rapid comes standard with two CCS2 connectors, which are standard for the European market. However, we can also adapt the connectors to other markets and change them to CCS1 or GB/T, which may be more widely used in other parts of the world.

Rapid is equipped with a 10-inch display that shows all relevant charging information, complete with simple and clear visualizations. It can show charging time, charging power, charging current, charge percentage and also how much power your car is able to take compared to how it is currently charging.

Rapid’s power is provided by the power modules inside the station. The power can therefore be increased by adding additional modules. In total, up to 8 modules can be installed in one Rapid station.

If you choose to configure Rapid with longer cables, we can easily ensure their safety and longevity. Our cable management solution adds cable holders to the roof of the station, making them secure and easy to use. This way you don’t have to worry about cables lying on the ground.

For download

PDF
PDF
Technical parameters (0,3MB)
Technical parameters (0,3MB)
PDF
PDF
Technical brochure (3MB)
Technical brochure (3MB)